SMD-300 Selective Pulse Metal-Detector User Manual
STT Group - Special Technique & Equipment
Moscow
Russia 33
NOTE: There might be a
situation when an occurrence
depth of the item to be
detected is lower, deeper then
Zmax=20
pointed out on the
Detector’s
screen (fig. 33).
In that case the item‟s virtual
image is displayed in the far
right part of a screen.
Operator can facilitate the matter and adjust the LCD-scale
pushing
AXIS
button on Control unit panel (fig.12).
Three scale versions for „occurrence depth‟ and „average cross-
cut item‟s dimension‟ is available. They can be displayed on
the Detectors screen by serial pressure of
AXIS
button (see
Table 2)
Table 2
LCD image scale version
Dmax,
cm
Zmax
,
cm
1
10
20
2
20
50
3
50
100
Each version corresponds to a consequent
AXIS
button press.
Item’s
occurrence
depth
Zmax
Fig. 33
