manualshive.com logo in svg

Stryker Triathlon Tritanium, Surgical Manualline

Share
Download
Stryker Triathlon Tritanium Surgical Manualline Download Page 43

6541-4-810

Impaction Handle

6541-4-825

Slip Torque Handle

See Catalog

CR , CS & PS Tibial Inserts

Instrument Bar

41

Component Implantation

Tibial Insert Implantation

Figure 59

>

 

 

Prior to assembly of the Tibial Insert, the Tibial 

Trial Insert may be placed on the Triathlon 

Tritanium Baseplate, to once more assess joint 

stability and range of motion .

> 

To assemble the Tibial Insert, distract the joint 

and angle the insert posteriorly into the Triathlon 

Tritanium Baseplate . The posterior lip of the 

Tibial Insert must fit beneath the lip on the 

posterior Triathlon Tritanium Baseplate wall .

> 

Attach the Tibial Insert Impactor to the 

Impaction Handle and impact to snap the Insert 

in place anteriorly . 

> 

The Tibial Insert is fully seated once the locking 

wire locks under the barbs on the anterior/ 

interior surface of the Triathlon Tritanium 

Baseplate wall .

6541-4-805

Baseplate Impactor/Extractor

6541-4-813

Tibial Insert Impactor

Size 1-3 – 6541-2-013  

Size 4-6  – 6541-2-046 

Cemented Keel Punch

Summary of Contents for Triathlon Tritanium



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands