manualshive.com logo in svg

Stryker Triathlon Tritanium, Surgical Manualline

Share
Download
Stryker Triathlon Tritanium Surgical Manualline Download Page 30

Figure 40

28

Tibial Preparation

Step 2 Tibial Resection (continued)

Tibial

Preparation

There are two options to secure the Universal Tibial 

Template to the tibia:

Securing Tibial Template

Option 1: 

>

 

 

Once satisfactory alignment and tibial component 

orientation are achieved, place pins through the two 

anterior holes of the Universal Tibial Template to 

secure its position . Remove the PS or CR Femoral 

Trial . Remove the Tibial Trial Insert and further 

secure the Universal Tibial Template by placing 

additional pins into the proximal tibia through any of 

the available holes . 

Option 2: 

>

 

 

Once satisfactory alignment and tibial component 

orientation are achieved, mark the anterior tibial 

cortex in line with the reference marks on the 

anterior border of the Universal Tibial Template . 

Remove the PS or CR Femoral Trial and disassemble 

the Tibial Trial Insert from the Universal Tibial 

Template . 

>

 

 

Check the orientation and coverage of the Universal 

Tibial Template on the proximal tibia again while 

referencing the marks on the anterior border of the 

Universal Tibial Template and the anterior cortex 

made previously . Reposition the Universal Tibial 

Template if required while maintaining a flush fit to 

the anterior tibial cortex .

>

 

 

Place pins through the two anterior holes of the 

Universal Tibial Template to secure its position . 

Further secure the Universal Tibial Template by 

placing additional pins into the proximal tibia 

through any of the available holes .

Tip: In dense bone, holes for pinning, may be pre-

drilled using the 1/8” drill (3170-0000) .

Note:  The Tibial Insert Trial can be removed by hand 

or with the aid of a retractor .

Anterior

Pin-hole

Anterior

Pin-hole

Reference Marks

Summary of Contents for Triathlon Tritanium



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands