manualshive.com logo in svg

Stryker Triathlon Tritanium, Surgical Manualline

Share
Download
Stryker Triathlon Tritanium Surgical Manualline Download Page 37

Figure 50

Instrument Bar

35

Tibial

Preparation

Figure 51

Drilling for Pegs 

 

Drill Selection:

>

 

Drilling the tibial peg holes will facilitate seating the 

implant . 

>

 

 

Select the 1/8˝ Tibial Peg Drill (6541-2-625) . 

>

 

Hold Tibial Peg Drill Template in position by applying 

finger pressure to the template . Position 1/8˝ Tibial Peg 

Drill through a peg hole perpendicular to the resected 

tibia . 

>

 

Drill through all four template holes using the 1/8˝ Tibial 

Peg Drill taking care to ensure surgical glove and fingers 

are not in contact with drill prior to drilling . 

>

 

Drilling is complete when the drill stop has contacted the 

template surface .

>

 

Carefully remove the Tibial Peg Drill Template from the 

bone by lifting straight up and out of keel slot .

Tip: The central hole of the Tibial Drill Guide can be used 

to facilitate removal of the guide straight up and out of the 

keel slot .

1/8˝ Tibial Peg Drill (6541-2-625)

6541-4-801

Universal Driver

6541-2-625

1/8˝ Tibial Peg Drill

6541-2-64X – See Catalog

Tibial Peg Drill Template

Summary of Contents for Triathlon Tritanium



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands