Stryker Prime TC, Maintenance Manual

Page: 32 / 64

E
F
G
H
L
M
N
J
P
K
F Fiig gu urre e 2 20 0 –– L Le eg g rre esstt cco om mp po on ne en nttss
L Le eg g rre esstt iin nsstta alllla attiio on n
T To oo ollss rre eq qu uiirre ed d::
• 1/4” hex wrench
• 3/16” hex wrench
• 3/8” drive torque wrench (in-lb)
P Prro occe ed du urre e::
1. Apply the brake. Push on the product to make sure that the brake is working.
2. Position the chair on its back.
3. If the product is equipped with the foley bag hook, use a 3/16” hex wrench to remove the flange button head cap screws
(A) that secure the foley bag hook on both sides of the chair frame. Discard the foley bag hooks (C) and screws (A) ( Leg
rest components
(page 27)).
4. Position the supplied leg rest mounting plate weldment (1460-166-005) (D) on the bottom of the chair frame.
5. Align the positioning tabs on the bottom of the supplied foley bag hooks (1460-001-051) (C) with the pilot holes on the
leg rest mounting plate weldment.
6. Insert the supplied foley hook spacer (1460-116-025) (B) into the hole on the foley bag hook.
7. Using a 1/4” hex wrench and the supplied socket head cap screws (0004-575-000) (A), secure the foley bag hook and
the leg rest mounting plate weldment to the bottom of the chair frame on both sides. Using a 3/8” drive torque wrench,
torque the screws to 70 ± 10 in-lb.
8. Verify proper operation before you return the product to service.
EN 28 1460-009-002 Rev B.0