Stryker Prime TC, Maintenance Manual

Page: 19 / 64

A
B
C
D
E
C
Torque item D
to 70 ± 10 in-lb
F Fiig gu urre e 8 8 –– F Frro on ntt cca asstte err w wh he ee ell rre ep plla acce em me en ntt
5. Reverse steps 2-4 to install the supplied caster.
N No otte e -- The axle barrel nut (B) head is keyed. Properly align the nut in the caster fork (E) during reinstallation.
6. Verify proper operation before you return the product to service.
F Frro on ntt cca asstte err a asssse em mb bllyy rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Pick
• (2) 5/32” hex wrench
• 3/4” socket
• 3/8” drive ratchet
• 3/8” drive torque wrench (ft-lb)
• 3/8” drive torque wrench (in-lb)
P Prro occe ed du urre e::
1. Position the chair on its back.
2. Using a pick, remove and discard the caster wheel axle barrel nut covers (C) (Figure 9).
3. Using two 5/32” hex wrenches, remove the axle barrel nut (B) and axle screw (D). Discard the axle barrel nut and axle
screw.
1460-009-002 Rev B.0 15 EN