Stryker Prime TC, Maintenance Manual

Page: 29 / 64

A
A
F Fiig gu urre e 1 16 6 –– L La ap p b be elltt b brra acckke ett tta ab bss
4. Install the supplied socket head cap screw (0004-671-000) (C) into the round hole on the bracket to secure the lap belt
bracket to the main frame weldment (B). Using a 3/8” drive torque wrench and a 3/16” hex bit, torque the screw to 70 ±
10 in-lbs.
B
C
F Fiig gu urre e 1 17 7 –– L La ap p b be elltt b brra acckke ett iin nsstta alllla attiio on n
5. Verify proper operation before you return the product to service.
L La ap p b be elltt rre em mo ovva all
T To oo ollss rre eq qu uiirre ed d::
• None
P Prro occe ed du urre e::
1. With one hand, grasp the end of the belt attached to the bracket (A). With the other hand, grasp the bracket (B) (Figure
18).
2. Squeeze the belt loop at the bracket and manipulate it through the slot (C) on the bracket to remove the belt. Discard the
belt.
1460-009-002 Rev B.0 25 EN