Stryker Prime TC, Maintenance Manual

Page: 16 / 64

4. Push back on the chart holder from the bottom to remove the chart holder from the lower chair frame, and then push up
to remove the chart holder from the upper chair frame.
A
Torque item A
to 25 ± 5 in-lb
F Fiig gu urre e 5 5 –– C Ch ha arrtt h ho olld de err rre ep plla acce em me en ntt
5. Reverse steps 2-4 to install the supplied chart holder.
6. Verify proper operation before you return the product to service.
S Se ea att rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• 3/16” hex wrench
• 3/8” drive torque wrench (in-lb)
P Prro occe ed du urre e::
1. Using a 3/16” hex wrench, remove the four button head cap screws (A) that secure the seat (B) to the chair frame
(Figure 6). Discard the seat and screws.
2. Using a 3/16” hex wrench, install the four supplied button head cap screws (A) to secure the supplied seat (B) to the
chair frame. Using a 3/8” drive torque wrench, torque the screws to 70 ± 10 in-lb.
EN 12 1460-009-002 Rev B.0