Stryker Prime TC, Maintenance Manual

Page: 21 / 64

A
B
C
D
Torque item D
to 75 ± 5 ft-lb
F Fiig gu urre e 1 10 0 –– S Sw wiin ng g--a aw wa ayy ffo oo ottrre esstt rre ep plla acce em me en ntt
8. Apply Syntec grease (3000-200-719) to the applicable areas ( Figure 10).
9. Reverse steps 3-8 to install the supplied swing-away footrest assembly. Using a 3/8” drive torque wrench, torque the
caster fork bolt (D) to 75 ± 5 ft-lb before installing the caster to the fork.
10. Verify proper operation before you return the product to service.
R Re ea arr w wh he ee ell rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Pick
• 3/4” socket
• 3/8” drive ratchet
• 3/8” drive torque wrench (ft-lb)
P Prro occe ed du urre e::
1. Position the chair on its front.
2. Using a pick, remove and discard the rear wheel center nut cover (A) (Figure 11).
3. Using a 3/4” socket and a 3/8” drive ratchet, remove and discard the rear wheel center nut (B).
1460-009-002 Rev B.0 17 EN