B
FFiigguurree 2222 –– CCoooolliinngg ffaann aanndd ccaaggee
4. Remove the cooling fan (BA) (Figure 22) from the fan cage (AH). Discard the cooling fan.
NNoottee -- During reinstall, route the fan power cables (BA) over the top of the supplied fan (B) and under the foam tape
5. Reverse steps to reinstall.
NNoottee
• During reinstall, align the VVeellccrroo® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
6. Verify proper operation before you return the product to service.
SSeennssoorr bbooaarrdd rreeppllaacceem
meenntt
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
• Needle nose pliers
• ESD system
PPrroocceedduurree::
1. See
2. See
Protecting against electrostatic discharge (ESD)
3. Disconnect all six of the pod sensor hoses from the foot box. Push in on the coupling and pull each of the hoses out.
NNoottee
• Do not bend or kink the pod sensor hoses.
• Pay attention to the sensor hose position, insertion color, and number labels.
EN
44
2972-009-002 Rev AA.0
Summary of Contents for Isolibrium 2972
