SSeerrvviiccee
PPrrootteeccttiinngg aaggaaiinnsstt eelleeccttrroossttaattiicc ddiisscchhaarrggee ((EESSDD))
CCAAUUTTIIO
ONN
• Always use ESD protective equipment before you open antistatic bags and service electronic parts.
• Do not place unprotected circuit boards on the floor.
NNoottee -- Always ship the circuit boards back to Stryker. Use the antistatic bag that the new board was originally shipped in.
The electronic circuits in the product are completely protected from static electricity damage when factory assembled.
Always use adequate static protection when you service the electronic systems of the product. All service personnel must
use static protection whenever they touch wires.
Sample antistatic protection equipment includes:
• Antistatic wrist strap
• Grounding plug
• Test lead with a banana plug on one end and an alligator clip on the other end
Make sure that you follow the ESD manufacturer’s instructions for appropriate protection against static discharge.
CCoovveerr rreeppllaacceem
meenntt,, ttoopp
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
PPrroocceedduurree::
1. Apply the IInnTToouucchh brakes.
2. Unplug the support surface power cord.
3. Remove the headboard and footboards and set aside.
4. Lower all the siderails.
5. Unsnap the two secure snaps (C) at the foot end corners (Figure 2).
6. Unsnap the four corner retainers (B) (Figure 2).
7. Insert a zipper pull tool or equivalent through the hole in the zipper slider to unlock.
8. Using the zipper pull tool or equivalent, unzip the support surface top cover from the bottom (A) (Figure 2).
NNoottee -- The zipper starts on the patient right side near the foot end.
EN
24
2972-009-002 Rev AA.0
Summary of Contents for Isolibrium 2972
