F
G
H
F
F
FFiigguurree 44 –– PPoodd VVeellccrroo®
® aanndd ssnnaapp rreettaaiinneerrss
19.Detach the foot end foam crib from the bottom cover.
20.Disconnect the exhaust tube quick disconnect (H) from the bladder assembly (Figure 4).
21.Remove and discard the bottom cover.
22.Reverse to install the new bottom cover.
NNoottee
• During reinstall, align the VVeellccrroo® patches, snaps and the foot box cover.
• Connect the corner retainers. Place the strap below each D-ring and snap to the cover. Repeat for the other three
corners.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
23.Verify proper operation before you return the product to service.
PPoodd aasssseem
mbbllyy rreeppllaacceem
meenntt
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
PPrroocceedduurree::
1. Remove the top cover. See
(page 24) for removal.
2. Unsnap the pillow (H) from the left and right side of the pod assembly (Figure 5). Save the pillow.
3. Separate the six VVeellccrroo® connectors holding the foot section gel crib to the pod assembly.
4. Remove the foot section gel crib (F) by lifting upward (Figure 5). Save the gel crib.
2972-009-002 Rev AA.0
27
EN
Summary of Contents for Isolibrium 2972
