FFiigguurree 88 –– PPoodd aasssseem
mbbllyy
11.Separate the VVeellccrroo® from the head end of the pod assembly (C) and feed the turn bladder hose quick connection
through the foam crib.
12.Remove and discard the pod assembly (C)(Figure 8).
13.Reverse to install the new pod assembly.
NNoottee
• During reinstall, align the VVeellccrroo® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
14.Run the leak diagnostic test. See
Accessing the Isolibrium Diagnostic Menu
in the IInnTToouucchh Maintenance Manual.
15.Verify proper operation before you return the product to service.
FFoooott bbooxx ccoovveerr aacccceessss
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
• T20 Torx driver
• T15 Torx driver
PPrroocceedduurree::
1. Apply the IInnTToouucchh brakes.
2. Unplug the support surface power cord.
3. Remove the headboard and footboards and set aside.
4. Lower all the siderails.
EN
30
2972-009-002 Rev AA.0
Summary of Contents for Isolibrium 2972
