Stryker 2131, Operation Manual

Page: 41 / 496

En
gl
is
h
www.stryker.com 2131-009-005 REV A 1-37
Return To Table of Contents
MAIN MENU: BED EXIT
Button Name Function
Z
o
n
e
A
ct
iv
at
io
n
A Traditional Bed Exit Zone
Press this button to activate the complete zone of detection .
This is the default zone .
B Medium Zone Press this button to activate the medium zone of detection .
C Small Zone Press this button to activate the small zone of detection .
A
rm
/
D
is
ar
m
D Arm Press this button to Arm the Bed Exit Detection System .
E Disarm Press this button to Disarm the Bed Exit Detection System .
F Volume ( see page 38 ) Press this button to access the Volume menu for the alarm .
Note
• A minimum of 5 lbs is necessary to arm the Bed Exit System .
• During a power outage, the parameters that were set for the detection of the Bed Exit are maintained and saved .
When power resumes, the system will reactivate itself to the same state it was before the power outage . The zone
that was selected before the power outage and the signal CALL NURSE on the wall of the hospital (optional) are
activated .
• The blue color on one of the zones indicates that this is the zone which is actually activated .
• When the zone color turns red, it means that there is a Bed Exit Alarm . In that case the Event Manager window
will appear .
Footboard Operation Guide
12:00 AM Oct. 25,2007
Room #:
Bed Exit
Arm
Disarm
D
A B
C
E F