Struers Unitom-2, Instruction Manual

Page: 25 / 122

Unitom-2
Instruction Manual
21

Replace the cooling water in the Recirculation Cooling Unit at
least once a month.

Press emergency stop.

Open the protection guard.

Remove the red protection caps from each of the two grease
nipples, located as indicated with a white circle in the illustration.

Lubricate in the two grease nipples with the grease gun and
move the spindle/cutting motor up and down by hand, until
grease comes out at the shaft. Use water-repelling grease, e.g.
Shell Albida Grease LX.

Clean superfluous grease away and mount the protection caps
at the grease nipples.

Release the emergency stop.
Monthly service
Replacing the Cooling Water
Lubrication of Bearings for Tilting
Frame