Struers Unitom-2, Instruction Manual

Page: 19 / 122

Unitom-2
Instruction Manual
15
Struers recommends the use of exhaustion as the materials to be cut
may emit harmful gasses or dust.
On the back of Unitom-2 you will find a joint for a 50 mm dia.
exhaustion hose.

Remove the red cap.

Mount an exhaustion hose from your local exhaustion system
onto the joint.
Unitom-2 is delivered with one cutting table with a quick-clamping
device, but it is often useful to have an extra cutting table for irregular
workpieces.

Remove the 4 plastic knobs in the bottom of the cutting chamber.

The second cutting table must be mirrored compared to the first
cutting table.

Adjust the second cutting table to parallel position and a distance
of 6 mm compared to the original cutting table.

Clean the cutting table with the flush hose.

Place the back stop parallel to the back stop of the original
cutting table. Use a steel ruler to adjust the position.

Tighten the back stop.

Place the quick-clamping device parallel to the quick-clamping
device of the original cutting table and tighten it.
Please refer to the Struers Clamping Tools brochure for details of the
range available.
The protection guard has a safety switch to prevent the cut-off wheel
from starting while the guard is open. Furthermore, a locking
mechanism prevents the opening of the protection guard before the
cut-off wheel is standing absolutely still.
Connection to External
Exhaustion System
Mounting an Extra Cutting
Table/Quick-Clamping Device
Mounting Cutting Table 2
Mounting the
Quick-Clamping Device
Explanation of Safety Factors