Strontech IMB-H114, Instructions Manual

Page: 21 / 38

40 41
• CPU Temperature
• System Temperature
• CPU Fan Speed
• System Fan Speed
• Core Voltage
• DIMM Voltage
• +5VSB
• +12V
System Component Characteristics
These items display the monitoring of the overall inboard hardware health
events, such as System & CPU temperature, CPU & DIMM voltage, CPU &
system fan speed,... etc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Power Management Setup
This page sets up some parameters for system power management operation.
Power Management Setup
] d e l b a s i D [ G N I R y B e m u s e R
Resume By PME/LAN1 [Disabled]
Wake on LAN [Enabled]
Resume By ] d e l b a s i D [ B S U
Resume By PS2 KB [Disabled]
Resume By PS2 MS [Disabled]
Resume By RTC Alarm [Disabled]
EUP Function [Disabled]
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
About Resume by RING
F1: General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI/PCIE LAN card. You must use an ATX power supply in order to use this feature.
Use this item to do wake-up action if inserting the PCI/PCIE card.
Resume By Lan1 (Disabled)
Use this item to enable or disable integrated LAN to wake the system. (This item
cannot be disabled if ME is on at Sx state. If disabled,resume by USB will not be
available.)
Resume on RING (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.
Resume By USB (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Press <Esc> to return to the Advanecd Menu page.
Resume By PS2 MS (Disabled)
This item enables or disables you to allow mouse ac ti vity to awaken the system
from power saving mode.
Resume By PS2 KB (Disabled)
This item enables or disables you to allow keyboard ac ti vity to awaken the system
from power saving mode.
Resume By RTC Alarm (Disabled)
The system can be turned o ff with a so ftware command. If you enable this item,
the system can automaticall y resume at a fix ed tim e based on the system’s RTC
(re alti me clock). Use the items below this one to set the date and ti me of the wake-
up alarm. You must use an ATX power supply in order to use this feature.
EUP Function (Disabled)
This item allows user to enable or diasble EUP support.
ACPI Sleep State (S3(Suspend to RAM))
This item allows user to enter the ACPI S3 (Suspend toRAM) Sleep State(default).
Press <Esc> to return to the Advanced Menu page.
ACPI Settings
ACPI Sleep State [S3 (Suspend to RAM)]
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Select the highest ACPI sleep
state the system will enter
when the SUSPEND button is
pressed.
Advanced
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
ACPI Setting
The item in the menu shows the highest ACPI sleep state when the system enters
suspend.
ACPI Sleep State
Suspend Disabled
S3 (Suspend to RAM)
Wake on LAN (Disabled)
Use this item to enable or disable integrated LAN to wake the system. (The Wake on
LAN cannot be disabled if ME is on at Sx state.) If disabled, resume by USB (S3) will not
be available.