Strontech IMB-H114, Instructions Manual

Page: 33 / 38

65 64
ME Configuration
Scroll to this item and press <Enter> to view the following screen:
ME FW Ve rsion (11.0.0.1205)
This item shows the ME FW version.
Press <Esc> to return to the Chipset Menu page.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Chipset
Management Engine Technology Configuration
TPM Device Selection [PTT]
1 n o i s r e V W F E M 1.0.0.1205
Enable/Disable ME Firmware
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
TPM Device Selec tion (PTT)
Use this item to select TPM device: PTT or dTPM. PTT-Enables PTT in SkuMgr. dTPM
1.2-Disables PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved
on it will be lost.
This page enables you to set setup administrator password and user password.
Security Menu
Administrator Password Status (Not Install)
This item shows administrator password installed or not.
User Password Status (Not Install)
This item shows user password installed or not.
Secu re Boot (Disabled)
This item is used to control the secure boot flo w, it is possible only if system runs in
User Mode.
System Mod e (Setup)
This item allows you to set the system mode.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Administrator Password
User Password
Administrator Password Status Install
User Password Status Not Install
Security Check [Setup]
System Mode Setup
Secure Boot State Not Active
Secure Boot [Disabled]
Main Advanced Chipset Security Boot Exit
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Set Administrator Password
Security Check (Setup)
This item let you select when you need to check the password. (This item only show
when administrator password had been set.)
Secure Boot State (Not Active)
Use this item to show the Secure Boot State.