Strontech IMB-H114, Instructions Manual

Page: 4 / 38

7 6
Feature
• DirectX11.1-compliant GCN-based graphics architecture
• Supports “Hyper-Threading” technology APU
• Supports Win8 and UEFI Secure Boot.
“Hyper-Threading” technology enables the operating system into thinking
it’s hooked up to two processors, allowing two threads to be run in parallel, both
on separate “logical” processors within the same physical processor.
The motherboard uses Skylake series CPU that carries the following features:
Processor
Chipset
• Supports DDR4 2133 (1GB/ 2GB/ 4GB/ 8GB) SDRAM with two-channel
architecture
• Up to 16GB 288 pin DIMM memory module support
Memory
Audio
• 2 Channel High Definition Audio Codec
• Meets Microsoft Windows Logo Program and Lync audio
requirements
• All DACs supports 44.1k/48k/96k/192kHz sample rate
• Software selectable 2.5V/3.2V/4.0V VREFOUT
• Direct Sound 3D
TM
compatible
• Power Support: Digital: 3.3V; Analog: 5.0V
The integrated Skylake H110 chip is a dual-chip with proven reliability and high
performance.
• Support one PCI Express x1 slot
• Integrated four SATA 6.0 Gb/s Host Controllers
• Six USB 2.0 ports supported
• Four USB 3.0 port supported
• Support two PCI Express x16 Gen3 slots (1 with PCIex4)
• Support one PCI slot
• Intel
®
High Definition Audio Controller
Expansion Options
The motherboard comes with the following expansion options:
• One PCI Express x1 slot
• Four SATA 6.0Gb/s connectors
• Support two PCI Express x16 Gen3 slots (1 with PCIex4)
• Support one PCI slot
The motherboard has a full set of I/O ports and connectors:
Integrated I/O
• Two LAN ports
• One Serial port (COM)
• One DVI port (DVI-D)
• two USB 2.0 ports
• One VGA port
• One HDMI port
• Four USB 3.0 ports
• One PS/2 keyboard and PS/2 mouse connector
• Audio jacks for line-out and Mic-in
The firmware can also be used to set parameters for different processor clock
speeds.
• Power management
• Wake-up alarms
• APU parameters
• APU and memory timing
• Graphic parameters
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
1. Some hardware specifications and software items are subject to change
without prior notice.
2. Due to chipset limitation, we recommend that motherboard be operated
in the ambiance between 0 and 60 ° C . (NOTICE: Test method: bare PCB
with 100% loading running Pass Mark 7.0 at chamber 60 ° C )
Ethernet LAN
The onboard LAN provides the following features:
• Supports PCI Express
TM
1.1
• IEEE 802.3/z
• Wake-on-LAN (including from S3, S4, S5, power button off)
and remote wake-up support
• PXE and RPL support