Strend Pro SC-3601, Instruction Manual

Page: 49 / 56

SYMBOLS EXPLANATIONS
Please read all safety warnings and instructions carefully; Electric shock, fire hazard and serious
burning may take place for violating relevant warnings and instructions.
Don't use or expose electric pruning shears in the rain.
As operating electric pruning shears, don't close the shearing areas by hands, for fear of
damage.
The product complies with valid European directives and assessment of conformity with these
directives has been carried out.
Protection by double insulation II. Grounding is not needed.
Do not throw in regular household waste. Instead, contact the recycling centers in an
environmentally acceptable way. Please take care to protect the environment.
Guaranteed sound power level.
Do not expose the battery to temperatures above 50 °C!
Prevent the battery from coming into contact with water!
Do not flush batteries down the toilet.
Do not throw batteries into a fire.
GENERAL SAFETY
1) WORK AREA SAFETY
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
WARNING: When used in Australia or New Zealand, it is recommended that this tool is ALWAYS supplied via
Residual Current Device (RCD) with a rated residual current of 30mA or less.
3) PERSONAL SAFETY
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of