Strend Pro SC-3601, Instruction Manual

Page: 54 / 56

8. Turn off: press the trigger and release it after listening to "dididi" for three times; the blade will be closed
automatically, as shown in Figure 8.
9. Turn off battery power switch.
Notes:
(1). the machine for a long time in the process of use, grasp the fever is normal phenomenon, please rest
assured to use.
(2). after the completion of the pruning work this season, or when replacing the blade, need to remove the
blade, add lubricating oil between the blade maintenance (as shown in figure 9 )
TIPS
As shearing, start to shear at
8 mm of a sprout. The biggest
cutting section is about 30 mm. As using, don't stretch hands in the
shearing range and please wear
corresponding safety devices
As shearing, shear away from a
sprout to reduce water loss. Don't shear off the trunk and sprout,
but shear off the weak branch and
damaged branch
As shearing, don't close to the
trunk too much and this is good
for the wound healing As shearing off the branch, please
shear off one by one and don't shear
by binding together
BATTERY CHARGING
It only can be charged indoor!
Batteries of new products are not fully charged. Before charging, please turn off the battery switch, insert
the charger output plug into the battery socket, insert the charger power plug into the power socket, and
show the red charger indicator, indicating that the charger is charging. After 5-6h, the charger indicator is
green. After finishing charging, you can use batteries. Fully charged batteries can be used for 6-8h
(discontinuous work)
ATTENTIONS
1. Before charging, please turn off the switch; as charging, it is normal to have slightly fevering charger and
batteries.
2. If batteries are not used for a long time, they must be recharged for 3 months to increase service life.