6
INTRODUCTION
This manual is written for:
▪
The Installer.
▪
System Design Engineer.
▪
The Service Engineer.
▪
The User.
The following symbol is used in this manual:
Warning: Important information concerning the safety of persons and/or the appliance.
Strebel Ltd is not accountable for any damage caused by incorrect following the mounting instructions.
For service and repair purposes use only original Strebel spare parts.
All documentation produced by the manufacturer is subject to copyright law.
1.1
Safety Guidelines
Before carrying out any installation work, please carefully read all the information contained in this manual,
which describes the procedures necessary for correct installation and use of the appliance.
This manual and the wiring diagram supplied with the appliance must be kept in a dry suitable place for possible future
consultation by engineers or users. This manual provides information on installation, operating and
maintenance of the appliance. We suggest that you keep a copy of these instructions near the appliance.
These instructions together with those in any supplemental instruction booklet cover the basic principles to ensure the
satisfactory installation of the appliance, although detail may need slight modification to suit particular local site
conditions.
Follow carefully the instructions contained in the manual and respect the safety regulations in force. The appliance
should be installed by a skilled installer, electrical work carried out by a qualified person, all according to national and
regional standards. Failure to comply with these regulations could deem the warranty invalid.
This appliance must be installed outdoors and connected to a hydronic heating system.
Check the electrical specifications given on the data plate and the wiring diagram before making any electrical
connections.
Deactivate the appliance in case of fault or poor operation. If the appliance requires repair, only contact qualified
companies or engineers approved by the manufacturer and only use original spare parts.
Without written approval of the manufacturer, the internal parts of the appliance may not be changed. When changes
are executed without approval, the appliance certification becomes invalid.
Commissioning, maintenance, and repair must be done by a skilled installer/engineer, according to all applicable
standards and regulations.
The manufacturer declines any responsibility for damage or injury due to non-compliance with the information given
within this manual.
The manufacturer/supplier is not liable for any damage caused by inaccurately following these mounting
instructions. Only original parts may be used when carrying out any repair or service work.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
The relevant British standards for installation, codes of practice or rules in force and in accordance with the
Manufacture
r’s instructions.
Summary of Contents for S-ASX 30
Page 2: ...2 ...
Page 24: ...24 10 CORRECTIVE FACTORS 10 1 Heating Performances ...
