Installing the Hard Drives
The FC10 can hold 3 x 2.5" drives and 2 x 3.5". The 2.5" drives should be fitted first using 4 screws per
drive. Rubber pads are supplied and should be fitted to the mounting holes prior to fitting the drives.
The 3.5" drives are fitted to the cage using thumb screws either side of the drive. When using a single 3.5",
it can be located anywhere along the cage.
INSTALLING HARD DRIVES - P11
NOTE: You do not need to remove the cage from
the chassis to install the drive. The illustration
is shown without the case for clarity.
M3 x 6
M3 x 5