Removing the Top Panel
The top panel is held in place with 4 screws, 2
each side of the case that are accessible
between the heatsink fins. Remove the screws,
then lift the top panel upwards and away from
the case. There is a recess either side of the
case to make lifting the top panel off easier.
P4 - PREPARING FOR ASSEMBLY
Installing the I/O Shield
Locate the I/O shield that is supplied with your
motherboard and firmly push it in place.
Ensure that it clicks in place fully otherwise the
motherboard will be difficult to fit.
Open the HDD/ODD Cage
The HDD/ODD cage has a swivel design that
tilts upwards towards the front of the case.
Remove the 2 screws, 1 from either side, then
lift and rotate the cage until it makes contact
with the front of the case.
Lift from here
M3 x 5
M3 x 10
