Transportation and
installation
V 152 10 11
Rev.: END
4-2
●
Attach the transport cables to the crane hook in such a way that when they are
taut they do not touch machine components located above the suspension bores.
●
If required, use lifting gear.
●
Adjust the length of the 4 support cables so that the gantry press is suspended
horizontally. Attach the support cables to the suspension brackets using shackles.
●
When selecting the shackles, ensure that each individual shackle has an
adequate load-bearing capacity!
Summary of Contents for Plus 70
