Product description
V 152 10 11
Rev.: END
3-3
Fig. 3-3: Two-handed control
On the gantry press with hydraulic door lock, the two-handed control (2) is mounted at
the left next to the control panel. The two-handed control is mounted on the control
panel itself on the other gantry presses.
Information!
An exact description of the controls can be found in Chapter 5.2 Gantry
press controls.
3.4
Hydraulic system
The gantry press hydraulic unit is
mounted below the protection plate (1)
The hydraulic unit is required to generate
the hydraulic pressure required for the
press.
Fig. 3-4: Hydraulics
Summary of Contents for Plus 70
