7
3 Setup
Connecting the system
Make sure the following preparations of the physical site are met:
•
The system must be placed on a flat and stable surface able to support 9.1 kg (20 lbs.) to avoid
the risk of falling.
•
The grounded electrical outlet (100–120/220-240VAC, 7/4A 60/50Hz) must connect a
power cord for your region and must be located within 2 m (5 ft.) of the system. Do not use an
extension cord or a power strip. Using these can possibly cause intermittent power issues.
•
The AC voltage selection (115V or 230V) switch must be set for the proper power input.
Select AC power
1.
Remove the AC power selection sticker.
2.
Set the AC power selection (115V or 230V) switch to the voltage used in your region.
Figure 5
AC Power Selection
Connect the power cord
Securely plug one end of the appropriate power cord into the receptacle at the side of the system
and the other end of the power cord into a grounded receptacle.
WARNING:
If the proper input voltage is not selected, the cleaning system will be
damaged.
115V
230V
Summary of Contents for WaveWash 55
Page 21: ...19 Declaration of Conformity...
