Stratasys WaveWash 55, User Manual

Page: 4 / 24

2
1 Introduction
WaveWash 55 Support Cleaning System is designed to remove SR-30 soluble supports from
ABS plus parts using Ecoworks tablets. The system is environmentally friendly, allowing for municipal
sewage disposal of used solution. WaveWash 55 Support Cleaning System can clean a single part
as large as 127 x 127 x 127 mm (5 x 5 x 5 in.).
Your part is left with a smooth and clean finish with the fine details intact. The majority of the soluble
support material can be removed by hand with relative ease, but is designed to be dissolved from
your parts for hands free finishing.
How to use this guide
This User Guide is laid out in easy to follow sections which cover Setup, Operation, Maintenance,
and Troubleshooting. Read each section carefully so that you will get the best performance from
your cleaning system.
Learn More!
An electronic User Guide is available at: http://www.stratasys.com/login . This guide provides
information on the following topics:
•
Troubleshooting information
•
Important safety notices and regulatory information
•
Detailed user instructions
You can also find more information at: http://www.Mojo3Dprinting.com .