10
To remove the baffle from the bottom of the carafe, use the following steps.
1.
Using the unlock finger holes, lift up and move the baffle to the unlocked position.
2.
Use the unlock finger holes to lift up and remove the baffle.
Filling the carafe
Manually fill the carafe with hot water. Fill the carafe so the water level is at least 7.62 cm (3 in.)
above the part(s) or to a maximum of 2.54 cm (1 inch) from the top of the carafe, whichever is less.
Part(s) must be fully submerged during the cleaning process. Use hot water when filling the carafe.
This will help dissolve the support structures more quickly. Place the lid on the carafe and set the
carafe on the base.
Starting the cleaning cycle
Start the cleaning cycle by pressing the start/stop button. The LED indicator will turn green and the
system will start an 8 hour cycle. The cleaning cycle can be stopped at any time by pressing the
start/stop button again.
Completed cleaning cycle
After an 8 hour cycle, the system will automatically turn off and the LED indicator will turn dark. The
cleaning cycle can be cancelled at any time by pressing the start/stop button. If the cleaning cycle
is restarted, the timer will revert to the 8 hour cycle. The size of the part and the amount of support
structure will determine the length of time necessary to completely remove support material.
Summary of Contents for WaveWash 55
Page 21: ...19 Declaration of Conformity...
