Site Preparation Guide
Preparing For Installation
Page 16
Remove Printer from Shipping Base
1. If necessary, install extensions to the forklift so that forks are at least 4 feet long.
2. Spread the forklift forks to 29 inches to fit inside the structural lifting tubes on the printer
base (
).
Figure 12: Forklift Spread Distance
Alternate lifting method
: If the forks are not wide enough or if the extensions do
not fit into the structural tubes, spread the forks as wide as possible to fit beneath
the printer, between the structural lifting tubes.
Structural
Lifting Tubes
29 Inches
Fork Spread
28 Inches Max