40 Operation
Dimension BST 1200 / SST 1200 User Guide
Pausing Build
While building a part, you may want to pause the operation - e.g,
to allow for replacement of a material cartridge. To pause the build
operation at any time, press
Pause
.
NOTE
When the build process is paused, Dimension completes the
current tool path before pausing.
Resuming Build from Pause Mode
If you have pressed
Pause
, and are ready to resume building the
part, press
Resume
. Dimension resumes modeling.
Resuming Operations from Standby
Mode
After several minutes of inactivity, Dimension enters Standby
mode. During Standby, the head temperature will decrease to save
energy.
Continue operation from Standby mode:
1. Press
Resume
.
•
The panel displays
Ready to Build
and your part’s
name (if there is a part in the queue). It also shows the
amount of material remaining in the model material
cartridge and the support material cartridge
(e.g.
Mod 90 %, Sup 85 %
).
•
Start Model
begins blinking.
2.
Press
Start Model
to begin modeling.
(Dimension may require a few minutes to warm up to proper
build temperatures. You can view the temperature values in
the display.)
