CleanStation CSIIP Site Preparation Guide
DOC-03202 Rev. A
4
1 Introduction
Use the CleanStation
®
CSIIP™ for removing Support material from models
printed on Stratasys 3D printers.
1.1 About this Guide
The information and requirements provided in this document ensure proper
installation and operation of the CSIIP Support removal system, manufactured by
PM Technologies. The customer is responsible for preparing the site as described
in this document.
If you have any questions about the information in this document, contact your
Stratasys representative.
All site requirements must be met before the installation date. The Site
Preparation Checklist should be sent to your Stratasys representative. Shipping
will be arranged after the signed checklist is received by Stratasys.
Non-compliance with requirements specified in this document might result in
additional installation charges.
