22
www.strata.co.nz
EZIARC 160 • EZIARC200
9. Do not use a welder to thaw frozen pipes.
10. Remove the stick electrode from the holder or cut
off the welding wire at the contact tip when not in
use.
Sparks & Hot Metal
WARNING!
Chipping and grinding causes flying metal, and
as welds cool they can throw off slag.
1. Wear an AS/NZS approved face shield or safety
goggles. Side shields are recommended.
2. Wear appropriate safety equipment to protect the
skin and body.
Cylinders
WARNING!
Gas cylinders contain gas under high pressure.
If damaged, a cylinder can explode. Since gas
cylinders are normally part of the welding
process, be sure to treat them carefully.
1. Protect compressed gas cylinders from exces-
sive heat, mechanical shocks, and arcs.
2. Install and secure cylinders in an upright posi-
tion by chaining them to a stationary support or
equipment cylinder rack to prevent falling or tip-
ping.
3. Keep cylinders away from any welding or other
electrical circuits.
4. Never allow a welding electrode to touch any cyl-
inder.
5. Use appropriate shielding gas, regulators, hoses,
and fittings designed for the specific application;
maintain them and their associated parts in good
condition.
6. Turn your face away from the valve outlet when
opening the cylinder valve.
