Using the Genus Functions with the programmer
Due to the nature of the Genus Functions, they operate is semi automatic mode
all of the time (i.e. the oven switches itself off at the end of the programme).
You can however also programme it to switch itself on (fully automatic) at a
time when you are not there so food is ready for you upon your return.
Once you have selected the Genus Function, the category and temperature you
wish to use, enter the cooking time as stated on the packaging or recipe. The
programmer will calculate the new cooking time after a couple of seconds.
The oven will now be operational.
The cook time icon will light up in green. If you do not want to use the
fully automatic programmer - do nothing else.
If you want to use the fully automatic programme wait for the end time
icon light up in red. Touch this icon and it will turn green, telling the
programmer you want to set an end time.
Then you should enter the time of day (i.e. 17.30) that you want the food to
be ready at. Once this has been selected, the oven will calculate a start time
based on the Genus Function’s calculations.
You do not need to worry about working out the start time yourself.
The oven will now ‘power down’ and switch off.
To cancel the automatic cooking function - touch the end time icon twice in
succession.
To amend any of the timer functions, touch the icon for that function twice or
until it flashes for a short period of time while you make your adjustments -
then store the changes.
Using the Main Oven Genus Function
18
08 27317 02 - 900 Genus-AU:08 27317 01 -900 Gen 9/4/08 10:37 Page 21
