Using Genus function 8 - Reheat
As with the other 7 functions, this function
will
re-calculate your cooking times
for you.
How to use the reheat function.
Touch the “G” icon until it turns green.
Once the “G” has turned green, the numbered categories below will begin to
flash red, signalling the you can select any of them - to select reheat touch the
number 8.
Using the table on page 10, see which type of reheated meal suits your dish
best.
i.e. is it a plated meal?
The timer display on the right of the on/off control knob will then flash,
signalling that a time needs to be entered. You should enter the time you
expect it will take the meal or dish to reheat - please take into account things
like the amount of food on the plate, and the thickness of the plate/cookware
and the type of cookware. Genus will then calculate the new, reduced time.
You can add to the reheat time if you feel it has not been long enough, or you
can take food out early if you feel it is heated enough. We recommend that
you check the food regularly while it is cooking.
At the last minute of cooking time, a tone will sound 3 times signalling the
cooking time is nearly over, from this point the timer display will show the seconds
counting down. When time has elapsed the appliance goes into standby mode
(approx. 4 minutes long) to allow you to add extra time, if desired. This switch-
es off the elements but leaves the lights and cooling fan on.
If you “choose” to increase the time by turning the control knob clockwise, then
the oven continues cooking. If you do not want, or need, to add any time
simply turn off the oven by pressing the on / off control knob and safely remove
your food.
Using the Main Oven Genus Function
16
08 27317 02 - 900 Genus-AU:08 27317 01 -900 Gen 9/4/08 10:37 Page 19