manualshive.com logo in svg

STOVES 720EF, User & Installation Instructions Manual

Share
Download
STOVES 720EF User & Installation Instructions Manual Download Page 26

Before you start - 

please read the

instructions carefully - planning your
installation will save you time and effort.
Look at the different ways the appliance
can be installed - as shown on the
following pages - and plan the installation
to suit your situation.
Leave the appliance in the base tray
packaging until you are ready to install it.
When you remove the appliance from the
base tray packaging, take care not to
damage it.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves.
Please note that the weight of this appliance
is approximately 

55kg

(unpacked).  Take care

when lifting it into the housing unit - always
use an appropriate method of lifting.
This appliance must be installed only at
low level - ie; under a worktop.  The
controls have been designed for viewing at
a low level, and it should therefore not be
installed at high level.

Important:

Do not modify the outer

panels of this appliance in any way.
Please note that all dimensions and sizes
given are nominal, some variation is to be
expected.

If this appliance is to be installed near to a
corner where the adjacent cabinets run at
right angles forward of the appliance,
there must be a gap of at least 90 mm
between the appliance and the cabinets,
to prevent overheating of the cabinets.

Fixing screws - 

The fixing screws are in

a polythene bag in the oven pack.
Depending on the method of installation,
some of the screws may not be needed.

Step 1: Prepare for installation
There are 3 methods of installing
the appliance:
Method 1:

Into a space between two

base units, ie; without a housing unit.

Method 2:

Into a housing unit, with an

internal height of less than 710 mm, which
can be modified to obtain the required
dimensions.

Method 3:

Into a housing unit, with an

internal height of 710 or more.
If you have a non standard size of cabinet
which leaves a gap above or below the
appliance, you may be able to buy a trim
kit (to fill in the gap) from the supplier of
your cabinets.

24

Quantity

Colour

Description

For Fixing:

6

Silver

No 8 x 12 mm long 

Runners to appliance

Self tapping screw

12

Black

No 8 x 12 mm long 

Runners and sidetrims to cabinet 

Chipboard screw

or housing

2 

Silver

No 8 x 25 mm long 

Appliance to cabinet

Chipboard screw

2

Silver

No 8 x 12 mm long 

Appliance to sidetrims

Self tapping screw

INSTALLATION INSTRUCTIONS

23892 02 - Q721EF/720EF  03/04/2001  15:31  Page 26

Summary of Contents for 720EF









































Reviews:

No comments

Brands by name

Popular brands

Load more brands