Stove Builder International Valcourt FP10 Lafayette, Installation And Operation Manual

Page: 75 / 97

FP10 Lafayette - Installation and Operation Manual
75
The duct system must be installed respecting the following:
1. It is recommended to wear
gloves to perform this
procedure. Remove the
plates closing up the 8"
dia. holes on top of the
fireplace. Then, cut and
remove the insulation in
order to obtain two 8" dia.
openings. Then, remove
the plates closing up the 8"
dia. holes inside the
fireplace.
2. Secure the 2 anchor plates
(C) with 8 screws provided
(B) on top of the fireplace
(4 for each anchor plate).
Insert
the telescoping
section (A) into each
anchor plate and secure it
with 6 other self-tapping
screws provided (B).