Stove Builder International Valcourt FP10 Lafayette, Installation And Operation Manual

Page: 91 / 97

FP10 Lafayette - Installation and Operation Manual
91
6. Insert a cotter pin in the last
hole on the right side of the
tube. Then bend the tabs on the
pin to keep in place.
7. Repeat steps 4, 5 and 6 for the
two tubes in the back then
install the baffle. Then, install
the two front tubes.
8. To remove the tubes use the
above steps in reverse order.
Note that secondary air tubes can be replaced without removing the baffle board.
Important Notes:
The air tubes are identified for placement as follows:
Model Type of tube
FP10 Lafayette fireplace Front
►
95 holes of 0.141"
Middle front
►
67 holes of 0.125 ’’
Middle rear
►
67 holes of 0.109 ’’
Rear
►
67 holes of 0.101 ’’