55
7 C LE A NING
i
The Cleaning Brush, cotton swabs
and paper or cotton cloths are
suitable for manual cleaning. We
recommend warm rinsing water or
isopropyl alcohol as solvents.
CAUTION
Isopropyl alcohol is flammable
and may easily ignite.
Caution! Hot surface!
•
Follow the safety instructions
of the isopropyl alcohol manu-
facturer!
X
Place the plastic parts in isopropyl
alcohol for max. 1/2 hour.
i
Prolonged contact with isopropyl
alcohol can lead to color chang-
es or embrittlement of the plastic
parts.
X
Allow all parts to dry thoroughly.
X
Check all parts for damaged sur-
faces, cracking, softening, harden-
ing, soiling or discoloration.
X
Remove any damaged parts.
X
If necessary, clean the cap lock
with warm rinse water or wipe it
with isopropyl alcohol.
7.1.3 Cleaning
NOTICE
Material damage caused by
improper cleaning
Stickers with the signet hologram
may fade and their adhesive may
dissolve
•
Avoid prolonged contact with
isopropyl alcohol
i
Do not put the optional accessories
including the Herb Mill, Filling Aid
and Magazine in isopropyl alcohol.
Clean these parts in the dishwasher,
or with warm rinsing water.
7.1.4 Reassembling
X
Assemble the parts in reverse order.
i
When assembling, make sure that
Seal Rings are properly seated. The
small Base Seal Ring, especially,
must sit completely in the Cooling
Unit Cap and be no longer visible.
X
Carefully insert the upper Acreen
into the groove provided.
i
Disregarding this may allow plant
particles to enter the Cooling Unit,
so blocking this or be inhaled.
de
en
fr
es
it
nl
