AXS Strikemaster
Engineering Manual
AXS Strikemaster Programming and Operation Manual May 2013 Page 13 of 22
For more information visit
www.storm-interface.com
© Copyright Storm Interface. 2013. All rights reserved
Programming : Change the Door Strike Time
i
) Setting the Door 1 ‘Strike Time’
The door strike time is the
number of seconds for which
the door lock remains released
(or open) when a valid entry
code is entered.
To set the Door 1
strike time, 'log on to Programming Mode',
then enter 5 to select the Door 1
Strike Time Set Up function.
Listen for the 'accept bleep'.
Then enter a two digit number
to set the duration of the strike
time in seconds (01-98).
Listen for the 'accept beep'.
NOTE: If the strike time is
required to be set to zero secs,
then you must enter '99'.
An entry of '00' will give you
a strike time of 1 second.
ii) Setting the Door 2 'Strike Time'
To set the Door 2
strike time, 'log on', then
enter 6 to select the Door 2
Strike Time Set Up function.
Listen for the 'accept bleep'.
Then enter a two digit number
to set the duration of the strike
time in seconds (01-98).
Listen for the 'accept beep'.
Double click here to hear the accept beep.
LED meaning
Red - System locked
Green
User Code Accepted
Flashing System in Programming Mode
Green/Red
Door 1
Enter
To re-allocate door strike times
when in Programming Mode.
(LED is
flashing )
Door 2
Enter
Enter Strike Time in
seconds
Enter
Start new
command sequence
Enter
to
LOG OFF
NOW ?
Enter
YES
NO
LED flashing
changes to
when you log off
