STORK TRONIC ST552 Glass, Manual

Page: 9 / 23

Order number: 900350.011 V2.70 Seite 9
Para-
meter Description of function Setting range Default
value Cust.
value
P74
Activation of burner clocking 0: Not active
1: Burner clocking below setpoint 1
P75
Duration of basket lowering at K3 at
start of timer 0...30 sec.
(0 sec. = inactive) 5 sec.
P76 Duration of basket raising at K4 at start
of timer 0...30 sec.
(0 sec. = inactive) 5 sec.
P77
Selection of post-frying time 0: Fixed time
1...20: Elastic time 0
P78
Activation of heating clocking 0: Not active, always turbo heating
1: Gentle heating 1
P79 Threshold for return to
heating clocking mode 0.0...99.0 °C
50.0 °C
Operating time parameters
P81
Temperature limit for
fat operating time elapsed 0.0...999 °C 999 °C
P82
Fat operating time until
warning message 0...99 hrs.
(0 hrs. = inactive) 0 hrs.
P83 Fat operating time until
controller block 0...99 hrs.
(0 hrs. = inactive) 0 hrs.
P84
Display of fat operating time ----- -----
P85
Temperature limit for reset of fat
operating time
(only effective if P86 = 2) -99...999 °C 100 °C
P86
Reset option of fat operating time 0: No restrictions
1: After warning message or blocking
2: After warning message or
blocking plus cool-down 2
Sensor and hardware parameters (if changed, Mains Off required)
P91 Selection of sensor type 0: Pt100 2-wire
1: Thermocouple type J (Fe-CuNi)
2: Thermocouple type K (NiCr-Ni) 0
P92
Display compensation ----- -----
P93
Software filter depth 1...64 8
P94
Mains frequency 0: 50 Hz
1: 60 Hz 0
P95 Type of analogue output 0: 0-10 V
1: 4-20 mA 1
LowFat- and NoContact settings
H1
Temperature increase for test heating
„LowFat“ 0.1…99.0 K 1.0 K
H2
Minimum duration for test heating
„LowFat“ 0…240 sec.
(0 sec. = inactive) 0 sec.
H3 Maximum duration for test heating
„NoContact“ 0…240 sec.
(0 sec. = inactive) 0 sec.
H4
Temperature increase for test heating
„NoContact“ 0.1…99.0 K 1.0 K
H5 Maximum temperature for
LowFat- and NoContact settings 1…990 °C 60 °C