STORK TRONIC 900219.092, Manual

Page: 13 / 18

Para-
meter Function description Adjustment range Standard
setting Custom
setting
A31 Special function at
boundary alarm 0: no special function
1: flashing display
2: buzzer
3: flashing display and buzzer
4: like 3, buzzer can be cancelled
4
A32
Setpoint display 0: display shows actual value
1: display shows setpoint S1 (S1‘) 0
A33 Switching input E1 (if
available) 0: not active
1: timer start possible 0
A34 Switching input E2 (if
available) 0: not active
1: setpoint reduction possible
(S1' relative to S1) 0
A40 Hysteresis mode contact
K1 0: symmetrically
1: one-sided
1
A41 Hysteresis mode contact
K2 0: symmetrically
1: one-sided
1
A51 Minimum action time
contact K1 „Off“ 0.0...99.0 sec. 0.0 sec.
A56 Alarm suppression after
“mains on” / ”standby-on” 0…60 min. 0 min.
A60 Sensor type 11: Pt100 2-wire
21: PTC
22: Pt1000 2-wire. 11
A70 Software filter 1: not active, or else
2…32: average value with 2…32
measuring values
2
A80 Temperature scale 0: Fahrenheit (“AUS”)
1: Celsius (“AUS”)
2: Fahrenheit (“OFF”)
3: Celsius (“OFF”)
3
A85 Reset mode of fat operation
time 0: reset after alarm message or
blocking and cool down
1: reset unconditionally
1
A86 Key delay for standby-key 0...100 (x 0.1 sec.) 10
(=1 sec.)
A87 Standby-function with key
On/Off 0: no function
1: standby function
1
A88 Reduced heating 0: not active, Turbo heating
1: active
1
A89 Initial setpoint selection
after mains on and/or
standby 0: same as before
1: S1
2: S2
3: S3
3
A90 Output connection relay K1 0: no connection
1: connection to contact K1
2: connection to contact K2
3: connection to alarm contact
1