Storch Kamine SIC 700 S, User Manual

Page: 5 / 31

5
Gültig seit/Valid from/Valide: 09.10.2019
1 BASIC AND TECHNICAL DESCRIPTION
1.1 Basic description of the equipment
Thank you for purchasing our product - the SIC 700 SMART automatic burning regulator for fireplaces
and stoves. When we developed this device, we put our many years of experience in burning
regulators to good use and linked the device to a mobile app using modern communication
technology. We are confident the product will meet your expectations.
This device has attributes that make it stand out in its area and incorporates the latest developments
in the field to significantly improve user experience and add value:

Informs about optimal fuel dosage

Indicates overheating

Displays a history of max. achieved temperatures for the 10 last runs

The combustion process is controlled by learning software that gradually adjusts the
regulation curve in order to optimize combustion

Can select between the following combustion modes: Eco – Smart – Turbo

Can select two types of fuel: wood – wood briquettes

The device is controlled through the mobile app
All of these properties improve the safety and economic aspects of combustion in fireplaces and
stoves.
1.2 No more overheating with SIC 100 SMART
The most noticeable poor effect associated with operating fireplaces or stoves is overheating. Very
often, people add more fuel than needed. This leads to a significant portion of excess energy
escaping through the chimney. Overheating is not economical and significantly reduces the service
life of the heating system, including the chimney.
SIC 700 SMART can detect overheating and inform
the user to adjust (reduce) the next fuel dosage.
1.3 General information
The mobile app informs the user about the current status throughout the combustion stage. The app
displays 4 colours (grey, yellow, green, red) representing the current temperature in the furnace.
Aim to adjust the fuel dose so the mobile app or display panel indicates a red colour when the
furnace is at its maximum temperature.
The mobile app also displays the flue gas temperature, position of the EAI (external air intake)
shutter, combustion time and other settings as described in the following sections.
Automatic burning regulation in both stoves and fireplaces optimizes the burning process in the
furnace in order to increase combustion efficiency.
STORCH automatic burning regulation is controlled by a microprocessor control unit that compares
the current burning status with a “combustion process optimization” program. based on this
evaluation, the amount of air entering the furnace is regulated using an electronically controlled EAI
(external air intake).
Automatic burning regulation can be installed in all fireplace and stove furnaces with an external air.