8
EN
EN
9
After installing and connecting the ultrasonic device, we recommend retesting the device to ensure that it
functions correctly. Perform the test using an ultrasonic tester (Item code. 07595). If the function check is
successful but ultrasound is not emitted after installation, an installation error has occurred.
Blinking at regular intervals (approx. every 5 seconds) = OK: Ultrasound is being emitted.
LED off = device is switched off.
1.
Is the operating voltage (12 V plus and minus) of the car battery also present at the unit connections?
2.
Is the engine switched off?
3.
Does the cable to terminal 15 have any voltage? (Is the ignition switched on? If so,
the device will be switched off.)
Prior to
installation
Installation
Function
check
Trouble
shooting
Circuit
diagram
Warranty
Prior to
installation
Installation
Function
check
Trouble
shooting
Circuit
diagram
Warranty
Prior to
installation
Installation
Function
check
Trouble
shooting
Circuit
diagram
Warranty
07515
+ –
15
07515
12 V (–)
earth
Fuse box
Ultrasonic speakers
Function control lights
Terminal 15
0.5 A F
12 V (+)
IMPORTANT! Terms of the warranty (please keep in a safe place)!
Our Ultrasonic device with 2 speakers comes with a 48-month functional warranty.
1.
Any reasonable complaints within the warranty period from the date of purchase will be remedied free
of charge, either through repair or delivery of a replacement product at our discretion. In order for the
warranty to apply, our product must have been properly installed and maintained in accordance with
our installation instructions.
2.
To enable us respond to problems, please return the complete unit, including the cable and installation
invoice, initially at your own expense. Once the problem has been resolved, the product will be returned
to you free of charge.
3.
We are not liable for any further claims, such as costs for installing/deinstalling the unit. Any claim
under Section 5 of our General Terms and Conditions shall remain unaffected, subject to the conditions
set out therein.
4.
Any damage caused by improper installation or incorrect, negligent or forceful operation shall invalidate
the warranty. There shall be no liability for consequential damage.
Technical changes and errors excepted.
Please fill in to claim against the warranty: For warranty claims to be processed, you must send us the filled
in coupon and the garage/installation invoice!
Garage stamp
Unit serial number
Date of purchase
Technical support hotline
+49 (0) 7631 9727-80
Service address
Norbert Schaub GmbH
Robert-Koch-Strasse 20
79395 Neuenburg am Rhein
GERMANY
Tel. +49 (0) 7631 9727- 0
Fax +49 (0) 7631 9727-27
www.stop-go.de
Prior to
installation
Installation
Function
check
Trouble
shooting
Circuit
diagram
Warranty
