14
Rack-Mounting
•
These screws support the appliance when it is inserted into the
rack. The number and position of the screws depends on the
depth of the rack.
6.
Repeat step 5 on the other side of the appliance.
7.
Line up the screws that you have attached to the side of the
appliance with the groove in the brackets attached to the rack.
8.
Slide the appliance into the brackets in the rack.
9.
Attach the appliance to the rack with two screws through the holes
in the front of the shorter brackets: one screw through the top
hole and another through the bottom hole.
Proceed to
Connecting the Cables
(page 16).
To install the appliance with long brackets
1.
Locate the two pairs of brackets in the delivery package: two inner
rails that attach to the appliance and two outer rails that attach to
the rack.
•
There are two sets of long brackets available: brackets with green
and yellow locking tabs and brackets with blue locking tabs.
2.
Detach the inner rails from the outer rails.
Caution –
You must use two screws to attach each rack-mounting
bracket to the rack. Using only a single screw for each bracket does
not provide sufficient support and may cause damage to the
appliance.
Inner Rail
Outer Rail
