background image

5

866-795-1586 • WWW.STONEAGETOOLS.COM

MANUFACTURER’S INFORMATION      

StoneAge Inc.
466 S. Skylane Drive
Durango, CO 81303, USA
Phone: 970-259-2869
Toll Free: 866-795-1586
www.stoneagetools.com

StoneAge NL
Reedijk 7Q
3274 KE Heinenoord
Netherlands
(+31) (0) 85 902 73 70
[email protected]

This manual must be used in accordance with all applicable national laws. The manual shall be regarded as a part of the machine and shall 
be kept for reference until the final dismantling of the machine, as defined by applicable national law(s). Please see separate User Manuals for 

the ABX-PRO Hose Tractor and PROP-300 Positioner. 

For detailed up to date information on these components. 

https://www.stoneagetools.com/manuals 

DESCRIPTION OF EQUIPMENT AND INTENDED USE

The Domed Bundle Accessory for the ProPositioner can be 
vertically mounted to a variety of heat exchanger tube bundles 
and has pneumatic powered linear and rotary drives. It is intended 
to be used with AUTOBOX

®

(ABX-PRO) TRACTOR, Control Box 

(CB-PROP-P), and ProPositioner (PROP-300).
The ProPositioner has been designed to provide a lightweight, 
low cost, entry level, option for contractors just starting out with 
hands free waterblasting equipment.

KEY FEATURES:

•  

Modular system designed for portability and easy assembly

•  

Quick install with minimal tools

•  

Utilizes 2.5 in. (64 mm) aluminum slotted box rail 

•  

Adjustable handles and Push-to-Connect air connections 

allow for quick adjustments.

SPECIFICATIONS

PROP-DBP POSITIONER

Imperial

Metric

Weights

ABX-PRO Tractor, Guide Tube/Collet 
Block, and 12in Guide Tube

27 lbs

12.2 kg

Spider Plate Mount

6 lbs 

2.7 kg

Linear Drive

11.5 lbs     

5.2 kg

Rotary Drive

32 lbs       

14.5 kg

Dimensions

Standard Slotted Rail

2.5 x 2.5 x 45 in.

64 x 64 x 1219 mm

Slotted Rail with extension

2.5 x 2.5 x 61 in.

64 x 64 x 1549 mm

Spider Plate Mount

11 x 7 x 4 in.   

279 x 178 x 102 mm

Linear Drive

13 x 8 x 6 in.       

330 x 203 x 152 mm

Rotary Drive

8 x 11 x 9 in.         

203 x 279 x 229 mm

Usable Exchanger Diameter Range 
Options

60 , 69 , 84 in. 

or 

96 in. with rail extension

1524 , 1753, 2134 

mm 

or

 

2438 mm 

with rail extension

Power

Camera System

Input power requirements 100-240V AC 1.8A

ABX-PRO TRACTOR

For detailed up to date information on these components.

https://www.stoneagetools.com/assets/pdf/manuals/ABX-PRO_manual.pdf

CB-PROP-X (-P or -S)

For detailed up to date information on these components.

https://www.stoneagetools.com/assets/pdf/manuals/PROP-300_manual.pdf

Summary of Contents for PROPOSITIONER PROP-DBP

























































Reviews: