StoneAge PROPOSITIONER PROP-DBP, User Manual

Page: 21 / 56

21
866-795-1586 • WWW.STONEAGETOOLS.COM
4. Locate the center of the tube face. If there is no center identifier,
use a tape measure to locate and mark center.
(Figure 27)
PROPOSITIONER ATTACHMENT TO TUBE BUNDLE
Man Way
Top Row
Center
Thumb
Knobs
Hex Bolts (x4)
Adjustable Expansion
Plugs (x4 )
5. Insert the Adjustable Expansion Plugs into the tube locations
that will allow the Spider Plate to be positioned on the tube
face as shown.
(Figures 27 & 28)
6. When the Spider Plate is located as shown, tighten the 4 Hex
Bolts on the legs with a 3/4” Wrench. Then tighten the Thumb
Knobs until the plate feels secured in place and does not lift
up.
(Figure 29)
7. There are set-up reference dimensions in the “Set-Up
Dimensions for 69” (1753mm) Tube Face” section in this
manual. (Figures 40-43)
6” - 8”±
(152mm - 203mm)
FIGURE 27
FIGURE 28 FIGURE 29