AN4989 Rev 3
49/118
AN4989
Connecting to the board
117
4.2.5 STM32CubeProgrammer
Reset and Connection modes can be selected in the ST-LINK configuration Pane.
Figure 33. STM32CubeProgrammer Reset mode
•
Software system reset: Resets all STM32 components except the Debug via the
Cortex-M application interrupt and reset control register (AIRCR).
•
Hardware reset: Resets the STM32 device via the nRST pin. The RESET pin of the
JTAG connector (pin 15) must be connected to the device reset pin.
•
Core reset: Resets only the core Cortex-M via the AIRCR
Figure 34. STM32CubeProgrammer Connection mode
