Copyright © 2006 – STM Norway AS
Publication no. 101557, Rev. T, November 3
th
, 2006
Page 15
4. PC configuration
After installation as described in Chapter 3 is carried out, the STM SatLink Terminal is ready to be
powered on.
4.1
Windows TCP/IP configuration
Verify that the TCP/IP configuration for PCs connected to the Terminal LAN is correct. Push the start-
button in Windows, select the Control panel and then open Network Connections. Right-click on the
relevant Local Area Connection and select Properties. A new window showing the Network Connection
Properties will pop up. In the General submenu of this window, scroll down, select Internet Protocol
(TCP/IP) and then push the Properties button shown in Figure 10. Then configure the PC client to obtain
the IP address automatically from the Terminal (section 4.1.1) or configure the PC with a static IP address
(section 4.1.2).
Figure 10: Windows XP menu for configuring the client TCP/IP configuration.