19
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: P10034AP-M4/H PRODUCT CODE:37981 05/2014
Other Useful Information (Cont.)
Troubleshooting
If you encounter problems with your microwave oven, check the issues raised on
this page to see whether your problem can be solved easily without a service call.
• Check to ensure that the microwave oven is plugged in securely. If it is not,
remove the plug from the outlet, wait 10 seconds, and plug it in again securely.
• Check for a blown circuit fuse or a tripped circuit breaker. If these seem to be
operating properly, test the outlet with another appliance.
• Check to ensure that the control panel is programmed correctly, and that the
preset timer has not been set.
• Check to ensure that the door is securely closed and the door safety lock
system is engaged. Otherwise, the microwave energy will not flow into the
oven.
If none of the solutions offered on this page help you solve the problem, then
contact a qualified technician or our after sales support line for advice on
examination, repair or return of the product.
Service and repair
•
DANGER:
Do not attempt to take the appliance apart. In case of damage or
malfunction, have it repaired by trained personnel only, or contact the after
sales support line for advice.
• Do not operate any appliance with a damaged cord or plug, or when it is
working abnormally. If the cord is damaged, call the after sales support line.
• If it becomes necessary to replace the microwave light, consult a qualified
electrician to have it replaced or contact the after sales support line for
assistance.
Radio interference
Operation of the microwave oven can cause interference to radio, TV or similar
equipment. When there is interference, you may try to reduce or eliminate it by:
• Cleaning the microwave oven door and seal.
• Re-orienting the antenna of the radio or television.
• Relocating the microwave with respect to the receiver.
• Moving the microwave oven away from the receiver.
• Plugging the microwave oven into a different power outlet so that it and the
receiver are on different branch circuits.